10
2.5 Fundamentals of riveting tool handling
Route all supply lines in a manner that prevents people from
tripping over them. Correctly route and attach the compressed
air hose. If a compressed air hose whips around wildly, it could
cause severe bodily injury.
Before starting work, check the preset air pressure! In-
correctly set air pressure could cause equipment dam-
age or bodily injury!
Make sure that the maximum permissible operating air pres-
sure of 6 bar / 87 PSI is never exceeded. Check the setting of
the pressure regulating valve before each riveting operation!
Make sure that the pump is only supplied with clean and dry
compressed air. Moisture and contamination could cause
equipment malfunction and/or damage. Only use com-
pressed air of quality class 2 as per ISO 8573-1.
Always disconnect the riveting tool from pressure when leav-
ing the work site!
The manufacturer accepts no liability for damage or injury
caused by improper repair or use of foreign replacement parts.
Incorrect usage of the riveting tool that leads to equipment
damage invalidates the warranty.
Riveting tool PNP 90 SNW-RIV has been tested and manu-
factured in accordance with European guidelines. The Decla-
ration of Conformity has been included with this instruction
manual.
The compressed air supply must be disconnected from
the equipment before any adjustment or maintenance
work is performed.
Danger of
bodily injury
Max. air
pressure
Clean
compressed air
Warranty
Declaration of
Conformity
Chapter 5.3
Summary of Contents for PNP 90 SNW-RIV
Page 31: ...31...
