4.3.4
4.3.5
4.3.6
4.3.7
360°
When both control valves are operating, the riveting op-
eration is started and the hydraulic plunger comes out and
stamps the rivet into the sheet metal (Fig. 4.3.5).
The rivet clamp can be pivoted 360° (Fig. 4.3.6).
If the maximum press pressure is reached, the pressure indica-
tor on the pivoting connection of the rivet clamp is activated.
This pressure indicator is a green button that comes out ap-
prox. 3 mm to signal that the end pressure has been reached
(Fig. 4.3.7).
Summary of Contents for PNP 90 SNW-RIV
Page 31: ...31...
