172-65236MA-04 (DC3-L) 7 Oct 2021
4
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
*Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
**Valve No. is displayed for products with options. This item is omitted from the nameplate
when there are no options.
Configuration
No. Name
1 Body
2 Separator Body
3 Cover
4 Separator
5 Body Gasket
6 Guide Pin
7 Body Bolt
8 Cover Bolt
9 Cover Gasket
10 Wave Spring
11 Float Cover
12 Float Cover Bolt
13 Spring Washer
14 Nameplate
15 Flange
(15
– 25 mm (
1
/
2
– 1 in)
DO NOT use for toxic, flammable or otherwise hazardous fluids.
This product is a separator for steam or air that separates and
discharges condensate from steam or air piping systems. Use only for
steam, air and/or condensate. This product is for intended use only.
Improper use may result in such hazards as damage to the product or
malfunctions that may lead to serious accidents.
WARNING
Model
Production Lot No.
Maximum Allowable
Temperature (TMA)*
Maximum Operating
Temperature (TMO)
Nominal Diameter
Maximum Allowable
Pressure*
Maximum Operating
Pressure
Valve No.**
Air/Steam Trap Outlet
Separator
Outlet
Condensate
Outlet
Separator
Outlet
