172-65427MA-05 (JH7RH-P/JH7RHT-P) 29 Sep 2016
6
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use this product in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
*
Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are PRESSURE
SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate when there
are no options.
Configuration
Model
Maximum Allowable
Temperature (TMA)*
Maximum Allowable
Pressure*
Maximum Operating
Temperature
Nominal Diameter
Maximum Differential
Pressure
Valve No.**
Production Lot No.
No. Name
M* R* F*
1 Body
2 Cover
3 Float
4 Orifice
5 Orifice Gasket
6 Orifice Locknut
7 Outlet Cover Gasket
8 Outlet Cover
9 Cover Bolt
10 Cover Nut
11 Cover Gasket
12 Outlet Cover Bolt
13 Outlet Cover Nut
14 Screen
15 Screen Holder
16 Snap Ring
17 Screen Holder Retainer
18 Nameplate
19 Cover Plug Gasket
20 Cover Plug
* Replacement parts are available
only in the following kits:
M = Maintenance Kit
R = Repair Kit
F = Float
