![background image](http://html.mh-extra.com/html/tmb/proplex-iq-one-mini/proplex-iq-one-mini_manual_1121632018.webp)
ProPlex IQ One+ Mini User Manual v1.1 – 30112020
18
—
RDM
In the RDM submenu, you can enable or disable RDM function for the desired port.
After navigating to the desired Port (A, B, C or D), press
UP
and
DOWN
buttons to select the RDM submenu and
press
OK
. The asterisk symbol indicates which option is active. Press
UP
or
DOWN
to navigate between the two
options and
OK
to enable or disable RDM.
After setting the RDM function, Select the back arrow
to return to the previous menu.
—
PRIORITY
In the Priority submenu, you can assign priority to ports set as an INPUT. If
two or more ports have the same priority, HTP merging will occur. When
signal is lost for the highest priority port, the DMX signal will be taken from
the port that has the next highest priority.
Zero “0” is the lowest priority and “200” is the highest.
After navigating to the desired Port (A, B, C or D), press
UP
and
DOWN
buttons to select the Priority submenu and press
OK
.
A selection box will display on screen
to show the current highlighted navigation which is changed with the
UP
or
DOWN
buttons. Highlight the current
Priority number at the top of the display and press the
OK
button to set the priority for the selected port.
An arrow will appear under the Priority number, which is used to navigate between decimal values with the
UP
or
DOWN
buttons. Pressing the
OK
button will make the arrow blink indicating that editing is enabled. Press
UP
or
DOWN
to change the value. When desired value is selected, press
OK
to stop the blinking arrow and repeat for other
decimal values. When the desired Priority value is set, highlight the Save button and press OK to save.
Highlight the Back button and press
OK
to return to the previous menu.