background image

5

7.

Insert a hosing connector (7) (with black dust protector removed) into the outlet (5) on

 

the 

right

 side of the dosing pump head (2) and connect another length of silicone hosing 

to

 

the other end. Place the end of this length of hosing in your desired dosing location e.g.

 

your sump, ensuring there are no kinks or sagging. Secure as required. 

Useful Tip:

 

We recommend the use of the EASI-Dose 

Plus

 

hosing clamp (sold separately -

please see back page for details) to ensure a neat and secure set up.

8.

Ensure all connections are tightly secured and that the EASI-Dose 

Plus

 

unit is installed

 

correctly before operating. Failure to do so could result in leaks or operating problems.

9.

Repeat the above steps for each dosing pump head you wish to use.

EXPANDING YOUR EASI-DOSE DOSING SYSTEM

The EASI-Dose 

Plus

Dosing System is expandable and allows two EASI-Dose 

Plus

Slave units

(4 pumps each) to be connected and independently controlled from the Master system

(EASI-Dose 

Plus

1, 2 or 3) giving you up to 8 additional pumps.

If you wish to expand your EASI-Dose 

Plus

Master system, simply connect an EASI-Dose 

Plus

Slave (sold separately) to your Master system by inserting one end of the the slave connection

cable (9 - supplied with Slave unit only) into the INPUT socket on the Slave and the other end

into either extension port A or B (11 or 12) on the back of the EASI-Dose 

Plus

Master

system. Once connected the Master system will power and automatically recognise the Slave

unit and you will be able to programme from the Master. 

Complete the installation points above for each pump that you wish to use. 

The EASI-Dose Plus can also be connected and used with the EASI-Stir magnetic stirrers to

offer simple automated stirring of your chosen liquid supplement or feed. Using the

connection cable supplied with the EASI-Stir, connect to the correct EASI-Stir extension port

on the back panel of your EASI-Dose Plus and the EASI-Stir will be automatically activated

15 seconds before each programmed dose time and then switches off before dosing

commences.  

Summary of Contents for REEF EASI-Dose Plus 1

















Reviews: