6
PROGRAMMING YOUR EASI-DOSE MASTER (ALL MODELS)
The EASI-Dose
Plus
Master units are quickly and easily programmed by using a series of buttons.
A. Pump/OK Button
Use this button to select the pump number you wish
to change settings for. It will allow you to scroll
through each of the pumps’ settings and see the
progress of each dose. At any stage whilst
programming your unit, pressing this button will save
your programmed settings and will return the doser
to running mode (the ‘:’ on the clock will flash whilst
in running mode but not whilst in setting mode).
B. Dose/
t
Button
This button will allow you change the dose quantity (in ml) and also scroll to the ‘When to
dose’ section. It will also let you scroll left when changing other settings.
C.Time/
u
Button
This will let you set the time of your unit, and also allow you to scroll right whilst changing
other settings.
D. Manual Feed/+ Button
This button will let you prime your pumps and also manually dose additives.
Please Note:
this will not affect your settings when doing so.
When changing settings, it will allow you to increase the number displayed.
A
B
C
D
