MAINTENANCE
Caution:
To avoid possible electric shock, special care should be taken when using any
electrical appliance near water.
Caution:
Always isolate the V
2
Auto Top Up System from the mains electricity before
installing or carrying out any maintenance.
1. Check regularly to ensure that the float switch and float switch guard are clean and free of
any dirt or detritus. If using in a marine saltwater tank, ensure that the float switch and the
float switch guard are also free of any salt and/or calcium deposits.
Please note:
We highly
recommend that this is checked at least once a week. Failure to do so could result in
operating problems and water overflowing from your sump or aquarium.
2.
Regularly check to ensure all connections are tightly secured.
3.
Test float by physically moving it to ensure switch is operating correctly.
4.
Clean the pump regularly to ensure it does not become clogged with debris or detritus.
8
