In most aquarium systems the loss of water from the aquarium is mainly due to factors such
as evaporation. If evaporated water is not regularly replaced, problems can occur and the
water quality of the aquarium may be compromised. The V
2
Auto Top Up System provides a
simple and hassle-free solution to automatically top up any water lost from the aquarium or
sump through evaporation and to create an advanced professional set-up.
PARTS REQUIRED FOR INSTALLATION AND OPERATION
1. Residual current device (RCD) with a rated residual operating current not exceeding 30mA.
ASSEMBLY
The V
2
Auto Top Up System is supplied almost fully assembled. After unpacking and before
installation you must:-
1. Ensure that the float switch guard is correctly secured on the
mounting bracket (see photo 1).
2. Connect all components to the component connection
cable (see photo 2 or 3).
3. Attach and secure one end of the flexible top up hosing to
the pump outlet (see photo 4).
4. Connect the power supply unit (PSU).
4
1
2
3
4
