Quick Start User Guide
5. Now tap on tuning, select the vehicles make, model and version of your
vehicle.
6. Follow the on screen instructions to download the stock file from your vehicle.
It will say “Stock file not present do you want to start the read operation” tap
yes and follow instructions until complete.
7. Unplug the powergate unit from the vehicle and go to your PC and plug it in
there.
8. Open up the TMCPWGUSER software again and wait for the tuning box to
connect.
9. On the main screen in the user program select download data then click start.
This will download the read from your vehicle to your PC> Save this
somewhere on your PC (Anywhere you like).
10. Email the file to “info@tmcmotorsport.com"
11. Once you have received a reply to the previous email with your tuned file
attached save this file somewhere of your choice on your PC.
12. If not already connected contact your tool to the PC & from main screen in the
user program select upload data and click start and find the tuned file sent
back to you from us and follow the on screen instructions until finished.
13. Now unplug the unit from the PC and connect to the vehicle.
14. Ensure the battery charger is connected if you have a bad battery and ignition
is switched on.
15. Tap on tuning and follow on screen instructions to load tune file into vehicle.
16. Once the tuned file is loaded turn ignition off and back on and ensure the
engine management light illuminates & check there are no stored faults or
codes and make sure the engine starts.
IF YOUR EXPERIENCING ANY ISSUES PLEASE GET IN CONTACT WITH US
2
VIA EMAIL OR PHONE.
17. Now switch off the ignition and unplug the powergate unit.
