W W W . T M G I N D U S T R I A L . C O M
P 1 5 / 1 6
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
Step 11 : Stretch and tighten top cover
•
The
roof
cover
must
be
stretched
and
tied
to
the
front
and
rear
truss
by
rope
going
through
the
flap
grommets
on
the
cover.
Start
from
the
top
center
and
go
toward
both
side
s
on
each
end.
Add
or
cut
the
rope
as
needed.
•
Pull
and
stretch
the
cover
enough
only
to
take
wrinkles
out.
Repeat
for
the
rear
truss.
Do
not
over
stretch
as
it
could
rip
off
the
grommets
(Picture
15)
(Picture 15-view from outside)
Step 12 : Tension the cover on the structure from both sides (Picture 16)
Insert tension tubes (#14) slowly into the bottom groove pocket on both long
sides. Add the water plug (#21) on the first tension tube to avoid tearing the
fabric and add one to the end of last tube as well.
Repeat the same step for the other side.
Picture 16
