W W W . T M G I N D U S T R I A L . C O M
P 4 / 14
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
Installation steps
Step 1 : Review the whole structure and choose the proper installation site
Refer to the foundation structure Figure 1, draw lines on the ground for positioning, all
dimension lines are drawn from the center of the pipe to the center, and the diagonal X must be
equal to Y.
Installation of foundation pipes: all foundation pipes shall be connected here with (#17) hex
bolts as shown in Figure 1, and fixed on the ground with (#15) expansion bolts (refer to figure 1).
Parts used in this step :
- (4) Foot tube (#6A)
- (4) Foot tube (#6B)
- (2) Foot tube (#6C)
- (32) Hex bolt (#17)
- (14) Expansion bolt (#15)
- (8) Short casing (#4A)
Figure 1
