W W W . T M G I N D U S T R I A L . C O M P 1 3 / 1 5 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
Step 7: Install top cover film.
when you are ready to install the roof cover, unpack the cover and position it
parallel to the building frame on one side. the cover must be pulled over the
top of the truss frame without being snagged or stressed on any frame
members. tighten the film evenly to eliminate wrinkles and make the film flat
and smooth. Do not over-tighten during the adjustment process, otherwise it
will cause unnecessary damage. At this time, you can install a clip spring
(#17A) to fix the film.
Figure 10
No.
Part
Qty
17A
50
30
1
