[operation manual ]
Hour hand
Minute hand
Power reserve hand
Crown at normal position
Second click
Second hand
First click
Date hand
Day hand
1.How to set the time
1) Pull out the crown to the second click position.
2) Turn the crown to set hour and minute hands.
(Check that AM/PM is set correctly.)
3) Push the crown back into the normal position.
*When time setting is performed in counterclockwise, day and date hands reverses.
Please reset by day-date correction.
2.How to set the Day-date hands
1) Pull out the crown to the first click position.
2) Turn the crown to left for date setting.
3) Turn the crown to right for day setting.
* Do not set the calendar between 9:00 P.M. and 2:00 A.M. If the setting of the calendar is made during this period,
the day or date will not change to the next day or date. Please set the calendar after changing the time other than
the above period.
4) Push the crown back into the normal position.
3.To wind up the mainspring
a) Manual winding … Rotate the crown clockwise at normal position.
Wind turning the ratchet wheel screw 8 times. It will start to move naturally after shaking slightly.
b) To wind up with winding machine.
Full wind up conditions
䞉
Rotary speed : 30 rpm
䞉
Operating time : 60 minutes
Version-02
Cal.NE20C
OPERATION
SII Products
14
