1.Pull out the crown to
2.Turn the crown clockwise
3.Pull out the crown to the
4.Push the crown back in
the first click.
until the previous day's
second click when the
to the normal position in
date appears.
second hand is at the
accordance with a time
12 O'clock position.
signal.
It will stop on the spot
and advance the hour
and minute hands by
turning the crown.
(Check that AM / PM
is set correctly)
*When the crown is at the
second click position.
Do not press any button.
Otherwise , the chronograph
hands will move.
*Do not set the date between 9:00 P.M. and 1:00 A.M.
Otherwise, the day may not change properly. If it is necessary to set the date during that time period, First change
the time to any time outside it, set the date and then reset the correct time.
・
The measurement time is indicated by the stopwatch hands that move independently of the small second hands.
・
The stopwatch can measure up to 12 hours in seconds.
(Standard measurement)
Ex)100m race (Press the buttons in the following order
RESET
(Reset to "0:00")
B
⇒
START
STOP
(Finish)
9
SII Products
Version-02
Cal.VD51B
OPERATION
TIME SETTING
HOW TO USE THE STOPWATCH
A
⇒
A
A
A
B
