Minute hand
Stopwatch 1/1 second hand
Button A
Hour hand
In stopwatch function
Start / Stop
Crown at normal position
Crown at second position
・
Time setting
Second hand
Crown at first position
・
Date setting
Button B
In stopwatch function
Stopwatch minute hand
Split / Reset
*The measurement time is indicated by the stopwatch hands that move independently of small second hand.
Before setting the time , check if the stopwatch 1/1 second , minute hands are in the "0"(12 o'clock) position.
* If the stopwatch is in use , press the button in the following order to reset it , and then ,
check if the hands return to "0" position.
(for details , see "HOW TO USE THE STOPWATCH")
* If the stopwatch is counting :
* If the stopwatch is stopped :
* If the split time is displayed :
・
If either of the stopwatch hands are not in the "0" position , reset them following the procedure below.
Stopwatch 1/1 second hand
Crown
Stopwatch minute hand
1. Put the crown out
2. Press button A or B to reset the stopwatch
3. Push the crown back in to
to the second click.
1/1second , minute hands to "0" position.
the normal position
* By pressing button A , set the stopwatch
1/1second hand.
* By pressing button B , set the stopwatch
minute hand.
*The stopwatch minute hand moves correspondingly with the stopwatch second hand.
*The hands move quickly if the respective buttons are kept pressed.
A
B
B
A
B
8
SII Products
Version-02
Cal.VD51B
OPERATION
DISPLAY AND CROWN / BUTTON OPERATION
ADJUSTING THE STOPWATCH HAND POSITION
A
B
B
