・
How to install
Protrusion C
Protrusion D
Put the date dial guard on the main plate so that
B portion
the A and B portion are over the guide pins,
as shown in the illustration at right.
Move the protrusion D of the date dial guard in the
counterclockwise direction so that it is caught
under the main plate.
Slightly move the protrusions C and E in the
counterclockwise direction alternately to set
Protrusion E
A portion
them under the main plate. Then, set the
A and B portions of the date dial guard to
the guide pins.
Check that the date dial guard is fixed
securely to the main plate.
Battery
・
How to install battery
Insert the Battery aslant in the direction shown by the arrow.
Check the Battery connection (+) securely touches the side
face of the Battery.
Coil block
Correct
Battery
Main plate
Battery connection (+)
Battery connection (+)
・
How to install
Have the hook portions ( 3 places) catch the main plate ( Fig.1 & Fig.2).
In disassembling and reassembling, take care not to deform the hook portion.
After installing the Battery connection (+), check that the three hook portions securely catch the main plate.
Tweezers
Hook portion
Main plate
Hook portion
Hook portion
[ Fig.1 ]
[ Fig.2 ]
SII Products
Version-02
Cal.VJ32/34B
TECHNICAL GUIDE
3)
6
1)
2)
4)
③
④
Main plate
