Version-01
Cal.VK68A
8.How to install the hands
Place the movement directly on a flat metal plate, or something alike to
install the hands.
[ Note: Second / Minute / Hour chronograph hands setting ]
(1) Push button (A) ( Chronograph start )
(2) Push button (A) ( Chronograph stop )
(3) Push button (B) ( Chronograph reset )
(4) After (1)-(3), Install the chronograph hands as shown
in the table below.
*Do not reuse the chronograph hands once detached. Please change and use new hands.
[ Note: To install 24 hour hand ]
Before installing 24 hour hand, pull out the crown to the second click position and rotate it clockwise,
until changed to the next date then install the 24 hour hand.
9.How to check correct hands attachment
The hand's top surface should be set parallel with the axis tip , as shown below.
*1
*2
Application hands
*1: Second chronograph hand
*2: Minute chronograph hand and Small second hand and 24 hour hand
TECHNICAL GUIDE
12
Cal.
VK68
Second chronograph
"12" o'clock (center)
Minute chronograph
"60" minute ( 10H )
Hour chronograph
－
Metal plate
Button (A)
( Chronoguraph start / stop )
Button (B)
( Chronoguraph reset )
