20
19
Turn the Steering handle to the left when power has been switched off to lock the Steering
handle. Press the Lock Button on the Remote Controller within an effective distance to turn on
the Alarm. The Turn Signal Indicators will stay on for 2 seconds after the scooter is properly
locked.
Locking the scooter
Check the scooter parts before riding. If there is any abnormality, repair it or
seek profession repair service
.
Check the conditions of the power circuits, lighting circuits, etc;
Check whether the front and rear brakes are working properly;
Check the firmness of the steering handlebar and the front and rear wheels;
Check tire pressure;
Check the reflector for damage and make sure it is clean.
A. Press the Lock button on the remote control. /Or switch off the vehicle with your NIU APP.
OR
B. Hold the READY button on the vehicle. /Or Down the throttle and carry bluetooth remote or a
paired mobile phone far away.
When the Indicator Button is pressed, the Indicator will light up to show the percentage
of the battery. The indicator has 5 sections. Each presents 20% of the battery level.
When charging, the indicator will flash to show the charging progress. They will stop
flashing when the battery is fully charged.
If all 5 sections flash, it means the battery has fault. Please contact your dealer for
consultation.
Battery Use and Maintenance
Battery Level Indicator
Indicator
Button
Indicator
Charging Port
Handle
Summary of Contents for MQi GT EVO
Page 1: ...USER MANUAL V1 0...
