TMP MQi GT EVO, Manual

28

27

DOs and DON'Ts while Riding

Please check the following details before riding.

Before Riding

Check Point

Description

Steering Handlebar

Braking

Tyres

Battery

Lights

Horn

Braking lever has 5 to 9mm idle travel.

Adequate for planned distance to travel.

Check whether the horn can work.

Check all the lights—High Beam, Low Beam, Brake Light, 

Turn Signal Indicator, etc.

(1) The air pressure range of the front tyre is 25 to 34 psi

(2) Proper tyre tread depth

(3) No cracks or openings

(4) Minimum load-capacity index: front 25, rear 48.

(5) Minimum-speed category: J.

(1) Steadiness

(2) Steering flexibility

(3) No axial displacement or loosening

Adjust the scooter upright before applying brakes.
If the tyres are locked and the scooter loses steering ability resulting from excessive braking 
force, loosen the grip on the braking lever and the tyres will be working again and the scooter 
will be stabilized. 
Try to maintain a 1:1 ratio of front and rear braking force on slippery roads.

      ATTENTION:

Inexperienced riders tend to use the rear brake only, which will accelerate 

the wear of the brake and result in a longer braking distance.

      WARNING:

Using the front brake or rear brake only is dangerous because of possible 

grip or control loss. Pay extra attention and use the brakes gently when riding on damp, 
slippery roads and around corners. Otherwise, riders will be exposed to great danger.

Braking Precautions

Check the conditions of the power circuits, lighting circuits, etc;

Check the conditions of the power circuits, lighting circuits, etc;