34
33
No output when
switched on
1. Dead battery
2. Battery not connected
3. Alarm failure
1. Charge the battery.
2. Check if it’s properly connected
3. Replace Alarm
Troubleshooting List
Malfunction
Description
Causes
Troubleshooting
1. Battery voltage is low
2. The power off switch is enabled
when pulling the brake lever
3. The Parking Mode has not been
turned off yet
1. Not properly connected
2. Battery temperature is too high
or too low
1. Low battery level
2. Under-inflation of tyres
3. Frequent braking and overload
4. Battery aging or normal
capacity loss
5. Low battery capacity resulting
from low temperature
1. Check whether the plug is
loosened.
2. Wait for it to achieve normal
temperature.
Motor failure when
turning the twist grip
after switched on
Battery charge failure
Dropping speed or
range
1. Charge the battery.
2. Do not pull the brake lever when
twisting the twist grip.
3. Check “Start the Scooter” section.
Check if the side stand is on.
1. Charge the battery and check if
the plug is properly plugged in
and whether the charger is damaged.
2. Check the tyre inflation every time.
3. Develop good riding habits.
4. Replace the battery.
5. Normal situaiton.
Identify the fault causes in reference to the meter panel fault codes.
Dead battery
Charge the battery.
Sudden stop during
a ride
Troubleshooting List
Malfunction
Description
Causes
Troubleshooting
10
11
12
Fault
Code
Meaning
FOC stop working
Motor stucked
Undervoltage or overvoltage
Overcurrent
Fault Code List
Causes
Troubleshooting
Check if the motor is stucked.
Check if the charger is intact.
Contact your dealer if happens often.
13
Controller overheat
Park the bike in shade and wait for it
to cool down.
30
Battery 1overcharge
Battery in overcharge
protection
Turn on headlight to discharge.Check if
the charger is broken or wrong type.
Summary of Contents for MQi GT EVO
Page 1: ...USER MANUAL V1 0...
