36
35
Battery
1overcurrent
Battery
2overcharge
Battery
2overcurrent
Communication
Harness failure
Communication
Module failure
stop charging
FOC failure
SIM card unpaid or weak signal
Charger in overtemperature
protection
Charger in overvoltage
protection
Charger in overcurrent
protection
Smart Central Controller or
Harness Assembly failure
31
50
51
60
65
67
80
81
82
99
110
Fault Code List
Fault
Code
Meaning
Causes
Troubleshooting
Stop charging and check if the charger
is failed.
Turn on headlight to discharge.Check if
the charger is broken or wrong type.
Battery in overcurrent
protection
Battery in overcharge
protection
Battery in overcurrent
protection
SIM card identification failure
MOSFET failure
MOSFET driver failure
SN code are not written or
Smart central controller
serial code are not written
Contact your dealer.
Contact your dealer.
Contact your dealer.
Remove the charger, and wait it to cool
down before charging again. If the
problem persists, contact your dealer.
Unplug and plug the charger again. If the
problem persists, contact your dealer
Stop charging and check if the charger
is failed.
Restart the bike. Contact your dealer
if it does not work.
FOC varification
failure
Motor failure
120
Motor Houle
malfunctioning
Battery 1
overdischarge
Battery 1
overtemperature
Battery 1
belowtemperature
Battery Pack 1 not
discharging
Battery temperature is too
low
Excessive voltage difference
Battery 1
overcurrent
123
130
131
132
133
134
111
Non-original Controller or
communication failure
Stop riding and let the motor cool down.
Motor
overtemperature
124
Motor overtemperature is
too high.
Motor Hall Sensor failure
Contact your dealer.
Motor cord disconnected
Motor Houle signal failure
Battery is undervoltage or
overvoltage
Battery temperature is too
high
Check if the charger is failed.
Contact your dealer.
Battery level is too low and
the BMS is about to enter
protection mode
Stop riding and charge the battery.
Unlock and lock the electric switch lock
again. If the problem persists, contact
your dealer.
Stop riding and park the bike in the
shade to let the battery cool down.
Charge the battery after it reaches
the operating temperature range.
Summary of Contents for MQi GT EVO
Page 1: ...USER MANUAL V1 0...
