TMP MQi GT EVO, Manual

14

13

Hazard Light (flashing lights)

Both the left and right turn signal indicators 
will flash when the Hazard LIght button is pressed.

High/Low Beam

Push the button up to turn on the high beam; 

push the button down to turn on the low beam.

Turn Signal Indicator

Push the button left to turn on the left turn
signal indicator;
Push the button right to turn on the right turn 
signal indicator.

Horn

Press the horn button to sound the horn, and 
release it to stop.

Cruising Mode

Press the button to cruise at current speed. 
Press again or brake to turn Cruising Mode off.

Cruising Mode
Hazard Light (flashing lights)
High/Low Beam
Turn Signal Indicator

Left-hand Combination Switch

1

1

2

2

3

3

4

Horn

5

Overtaking Light Button

6

4

5

6

Overtaking Light Button

To signal overtaking with flashing light, the rider 
may press and release the Overtaking Light
Button repeatedly. 

Scooter Light Adjustment

： 

Push the button to the right to turn off low beam lights;
Push the button to the middle to turn on the outline 
marker light and the license plate light;
Push the button to the left to turn on the headlamp.

1

2

Safety Switch
Riding Mode
Scooter Light Adjustment
Start Button

Right-hand Combination Switch

1

2

3

4

3

4

Safety Switch

Push the top button to cut off the power system. 
If you press the button while riding, the scooter will 
start to coast (power will be cut off);
Push the bottom button to restore power and ride normally.

Riding Mode

Press the left/right button to switch between 
riding modes.

Start Button

Press the Start button and the scooter will be 
ready to go.
1.Hold the Start  button to turn on the vehicle

;

2.Press the Start button and the scooter will
be ready to go

;

3.Double tap the Start button to open the seat
compartment.