T'nB 47624 Instructions Manual Download

Page: 13 / 26

Optical

f/2.6 mm Hemispherical Lens 4 elements

Wide angle

120°

Video Resolution

720P (1280*720p) 30fps ; VGA (640*480p) 30fps

Photo Resolution

5,3,1 MP

Format

JPEG

White Balance

Auto

Batterie

500 mAh lithium-ion

Charge

Via câble micro USB/ USB

Audio

Built-in microphone

Memory

MicroSD card up till 32GB class 10 or higher version (not
included)

Recording Time

Up till 90 min

Included cable

Micro USB/ USB

Operating System

Windows XP/Vista/ 7/8 / Mac10.8

Wight

56g

Screen Size

1,77’’

Output

Micro USB

Languages

English, French, Spanish, Portuguese

Note : The information and settings explained in this manual have been there

since the debut of the manual and are susceptible to changes without any prior

intimation.

Specifications

Connexion à un ordinateur

User Notice :

The device delivers exceptional images and
videos. Therefore, only the micro SD cards
of minimum class 10 are accepted by the
device

Battery care and storage

The camera contains delicate parts,
especially the battery. It is not advisable to
drop, dismantle, open, crush, bend, deform,
pierce, expose to micro waves, burn or
repaint the camera, or to insert things in the
battery opening. Do not use the camera or
the battery if they are damaged, for example
if they are cracked, punctured or water
damaged. If you dismantle or puncture the
battery, it may explode or catch fire. Do not
store your camera and battery in excessive
heat or cold. Very high or very low tempera-
ture can reduce the battery life or prevent
proper functioning. Avoid sudden changes
in temperature or humidity as condensation
may occur inside or outside the camera.

Battery disposal:

The lithium-ion batteries

contain recyclable materials and are conside-
red recyclable. Find out about the local laws
and the recycling centres in your locality.
Before throwing the lithium-ion batteries,
cover the terminal parts with sticky tape or
with a packaging foil to isolate and prevent

the terminals from coming into contact with
other metallic objects so that they do not
catch fire while transporting.

Prevention of damage due to the water in
your camera

The rubber seal that covers the inside of
the housing forms a waterproof barrier that
protects your sport camera in wet conditions
and under the water. Make sure that the
rubber seal remains clean. A single hair or
a grain of sand can cause a leak. After each
use in the salt water, you must rinse the
outside of the housing with some fresh water
and dry it. Otherwise, the pivot may rust and
the salt accumulates in the seal, which can
cause some failures. To clean the seal, rinse
it in the fresh water and shake it dry (wiping
with a cloth may leave fluff and compromise
the seal). Reinstall the seal into the slot of
the back door of the housing.

CAUTION:

If you do not follow these precau-

tions whenever you use your sport camera,
the leaks can damage or destroy your came-
ra. The warranty does not cover the damage
caused by user error.

KIDSCAMB.indd 24-25

28/07/2017 12:42