III
U
SE
1) C
HARGE THE CAmERA
:
Charge your camera using the USB cable supplied. The camera is recharged when the indicator light
goes out (approximately 2 hours).
2) m
EmORy CARD
:
Insert your micro SD memory card into the slot.
As the camera does not have an internal memory, make sure you insert a memory card before you
begin filming. Otherwise, an error message is displayed on the camera.
Recording does not work without a memory card.
3) S
WITCHING yOUR CAmERA ON
/
OFF
:
To switch your camera on, press the on/off button for three seconds.
To switch it off again, press the on/off button.
Automatic standby device to save the battery.
4) I
NDICATORS
:
• The "Busy" light comes on when the camera is performing a task (recording a video, taking a photo,
automatic screen cutout…).
• The "Charge" light comes on when the camera is charging. When it has finished charging, the indi-
cator light turns off.
5) R
ECORDING mODES
:
USB cable
mode Switch
Photo mode: to take photos (cf paragraph 6)
Video mode: to film (cf paragraph 7)
Continuous recording mode: the camera continuously records
5 minute sequences. When the memory card is full, the ca-
mera deletes the first sequence recorded automatically to
continue filming in real time. (cf paragraph 8)
6) P
H
To take
7) V
ID
To start
repeat t
The cam
when th
8) C
O
To start
- 8 -
NEW USE SPCAmHD_mise en page 1 04/04/14 15:07 Page8
