36
•
Always replace the brake fluid with type DOT 3 brake fluid.
RECOMMENDATION: An authorized TN’G Dealer or Service Center should complete
all brake fluid adjustments.
SPARK PLUG REPLACEMENT
Check spark plug if scooter is hard to start.
1. The gap should be between 0.023 & 0.032 inches.
2. The electrode should be a light brown color.
3. Replacing the spark plug,
•
Remove the plug cover and remove the spark plug using the spark plug
wrench in the tool kit.
•
After setting the gap of the new plug, insert it into the cylinder & tighten
firmly by hand, then by using provided wrench tighten another ½ to ¾ turns.
•
Reattach the spark plug cover.
! WARNING
: Do not change spark plug while engine is hot.
CAUTION
:
•
Incorrect gap can cause problems to the scooter engine. Make sure it is correct!
•
If the spark plug is fouled or damaged, replace it with (Autolight 4194) or like plug.