17
3) After the fluid has stopped draining, replace the drain plug in the drain
hole and tighten the plug with a wrench until it is snug. (Do not over-
tighten the plug!)
4) Unscrew the rear drive oil filler cap
located on top of the rear drive
assembly beside the rear wheel. (See
Fig. 21)
5) Use a small funnel to pour in
100 cc’s of SAE20W-50 oil into the
rear drive. (See Fig 22)
6) Replace the rear drive oil filler cap
and tighten the cap until snug.
Lights
Open the headlight & taillight assemblies to look for damage & clean out any
accumulated dust. Operate the turn signals & check them for correct opera-
tion. Check the turn signals for physical damage.
Fig. 21
Fig. 22