5
3. Cascade Installation
continued
•
For source video resolutions lower than 1600 x 1200 @ 60Hz, the distance
between the first level splitter and any last level splitter must not exceed 98 ft. (30 m.).
The video distance can be extended by using a DVI Extender in between each
level of splitters. Each Extender can be located up to 98 ft. (30 m.)
from a splitter, and 16 ft. (5 m.) from the next level splitter or connected monitor.
•
The DVI 1X2 and DVI 1X4 are designed for monitor refresh rates of 60Hz.
1.
Make sure the DVI and Audio source are powered OFF.
2.
using a DVI with 3.5 mm Audio Cable or a DVI Single Link Cable and 3.5 mm Audio
cable .
3.
Connect a set of available output ports on the first level splitter to the input
ports on a second level splitter using a DVI with 3.5 mm Audio Cable or a
DVI Single Link Cable and 3.5 mm Audio cable.
DVI/Audio Source
201004020 93-2998.indb 5
4/29/2010 4:43:08 PM
Connect the DVI and Audio source to the input ports on the first level splitter.