background image

WARRANTY

A. To reduce the risk of electric shock, do not expose this product to rain 

     or moisture.

B. Operate this product using only the included external power supply. Use

     of other power supplies could impair performance, damage the product,

     or cause fire.

C. Use only recommended accessories to avoid fire, shock or other hazards.

D. Unplug this product before cleaning. Use a damp cloth for cleaning. Do

     not use cleaning fluids or aerosols, which could enter the unit and cause

     damage, fire or electrical shock.

E. Do not attempt to service this unit. Instead, disconnect it and contact your

     Authorized Reseller or technician.

1 year for parts and 90 days for labor.

8

201004020 93-2998.indb   8

4/29/2010   4:43:09 PM

SAFETY INFORMATION

The equipment it manufactures to be free from defects in material and

workmanship for the following limited warranty period:

At its option, repair or replace the equipment, provided that the equipment

has not been subjected to mechanical, electrical, or other abuse or 

modification, if equipment fails and company being notified within the 6 

months of the first purchase.

This warranty is in lieu of all other warranties expressed or implied, including

without limitation, any implied warranty or merchantability or fitness for any

particular purpose, all of which are expressly disclaimed.

The information in this manual has been carefully checked and is believed to

be accurate, however, it assumes no responsibility for any inaccuracies that

may be contained in this manual. In no event will be liable for direct, indirect,

special, incidental, or consequential damages resulting from any defect or

omission in this manual, even if advised of the possibility of such damages.

The technical information contained herein regarding DVI Single Link with 

Audio splitter features and specifications is subject to change without notice.

Summary of Contents for R05-SPL-35A-102









Reviews: