4
5. NOMENCLATURE AND FUNCTIONS
4. HANDLING PRECAUTIONS
• Do not cover the infrared wireless microphone’s infrared emitter with the hand or hide the
microphone by placing it inside clothes. Covering the infrared emitter will disable light
transmission.
• Avoid using the infrared microphone in close proximity to plasma displays or infrared LAN,
which could lead to noise or microphone malfunctions.
• Do not dismantle or modify the infrared microphone.
• Take care not to drop the infrared microphone on the floor or hit it on hard objects, as this
could lead to microphone failures.
• The infrared microphone cannot be used outdoors or in areas exposed to direct sunlight.
• Do not place the infrared microphone in high-temperature locations, such as in a car
parked with its doors closed in summer, or in highly humid locations, as this could lead to
microphone failure.
• Avoid using the infrared microphone in locations that can be splashed with perspiration or
seawater, as this could lead to microphone failures.
• When cleaning the infrared microphone, be sure to turn the power switch to OFF. Wipe with
a soft dry cloth. If it gets very dirty, use the soft cloth slightly moistened in neutral cleanser.
Never use volatile spirits like thinner, benzine, or alcohol. Such chemicals may damage its
plastic surface.
• Clean the charging terminals regularly using a dry cotton swab. Dirty terminals can cause
poor electrical contact and cause batteries to be charged incorrectly.
FUNCTION
ON/OFF
MIC
A
B
H
L
[Inside of the cover]
[Top]
[Front]
[Left side]
[Right side]
[Rear]
[Bottom]
1
2
3
4
5
6
7
8
9
10
11
12
