5
6
16. DC Power Input And Audio Output Connector
RJ45 connector.
•
DC Power Input (Pin7 24V+, Pin8 24V-)
Connects to the accessory AC adapter.
•
Audio Output
(Pin1 Hot, Pin2 Cold, Pin3 Earth)
0 dBV, 10 k
Ω
, electronically balanced, connect to
an amplifier.
17. Mounting holes
Use the accessory screws to install the interface
to the 2 gang box. (Refer to p.7.)
[Rear Panel]
16
17
6. Power Switch
Press ON/OFF to turn on the power.
Press again to turn off the power.
7. Input Channel Selection Button
Press the Input button to select the input channel,
and ensure input channel indicator (No.14)
is on.
8. Volume Down Button
The volume decreases by one level when short press,
and decreases quickly when long press.
When the volume is reduced to the minimum, the
system will prompt you with a beep sound.
9. Volume Up Button
The volume increases by one level when short press,
and increases quickly when long press.
When the volume is increased to the maximum, the
system will prompt you with a beep sound.
10. USB Card Input
Socket for USB Input.
Audio formats: MP3, WAV.
Format: FAT16, FAT32, Max. 32GB.
11. Play/Pause
Press this button to toggle between Play and Pause.
Note: If Bluetooth or USB input is selected, this
button will play and pause the music source. If AUX
input is selected, this button will mute and unmute
the music source.
12. Skip to Last Track
Press this button to skip to previous track.
Note: Operates while Bluetooth/USB is active.
13. Skip to Next Track
Press this button to skip to next track.
Note: Operates while Bluetooth/USB is active.
14. Input Channel Indicator
Lights blue when the input channel is selected.
15. IR Receiver
Signal receiver from accessory remote control.
