background image

2

When Installing the Unit

• Refer all installation work to the dealer from whom

the speaker was purchased. Installation work
requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.

• Install the speaker only in a location that can

structurally support the full weight of the unit and
mounting bracket. Doing otherwise may result in
the speaker falling down and causing personal
injury and/or property damage.

• When installing the speaker in the snowy area,

take appropriate measures to prevent snow from
lying on the speaker. If the snow lies on it, the
speaker may fall, causing personal injuries.

• Do not use other methods than specified to install

the speaker. Extreme force is applied to the
speaker and the speaker could fall off, possibly
resulting in personal injuries.

• Use screws that are appropriate for the ceiling's or

wall's material and structure. Failure to do so may
cause the speaker to fall, resulting in material
damage and possible personal injury.

• Ensure that all screws are securely tightened. If

they are loose after installation, the speaker could
fall down, possibly resulting in personal injury.

• Do not mount the speaker in locations exposed to

constant vibration. The speaker or its mounts can
be damaged by excessive vibration, potentially
causing the speaker to fall, which could result in
personal injury.

• Do not use anti-rust lubricant. If it contacts resin or

rubber parts, they could deteriorate and cause the
speaker to fall, possibly resulting in personal injury.

• Avoid installing the speaker near seaside or in

locations exposed to corrosive gas. The speaker or
its parts may be subject to corrosion, which might
cause it to fall or result in personal injury.

• Do not install the speaker in indoor swimming pools

or such locations where liquid chemicals are used.
The parts deteriorate if corroded, causing the
speaker to fall, which could result in personal
injury.

When the Unit is in Use 

• If any of the following irregularities occurs,

immediately switch off the amplifier's power, and
inform the shop from where the speaker was
purchased. Further using the speaker may result in
fire or electric shock.

· If you detect smoke or a strange smell coming

from the speaker

· If water or any metallic object gets into the

speaker

· If the speaker falls, or the speaker case breaks

• To prevent a fire or electric shock, never open nor

remove the speaker case. Refer all servicing to
your  nearest TOA dealer.

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe

operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or

cautions regarding safety.

• After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions 

Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards. 

Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury. 

WARNING

Summary of Contents for SC-615BS













Reviews: