26
9. CONNECTIONS
[TS-D1000-MU]
9.1. Power Supply Connections
(1) AC Adapter Connection
Use the supplied AC adapter.
Use only the supplied AC adapter. Using any other AC adapter could
result in overheating and fire.
CAUTION
Secure the AC adapter cable in the cable clamp as shown at right to
prevent the adapter plug from accidentally being pulled out.
9.2. Signal Ground Connections
(2) Signal Ground Connection
When connection of an external device to the TS-D1000-MU results in the generation of audible noise,
connect this terminal to the Signal ground terminal of the external device. Noise output should be greatly
reduced.
Note
This is not a protective ground connection.
Cable clamp
To DC inlet
AC adapter cord
Recording
device
To microphone
Speaker
(5) To network
(4) To Sub control Unit
(3)
To Conference unit
(2)
To
Signal
ground
terminal
AC adapter
Amplifier
(1)
To AC Mains
(6)
(7)
(8)
(9)
(10)
External processor
Video conference
system