Model: TTT-710
5.2 Basic Operation
- 52 -
(Continued from previous page)
Operation Screen
example
②
Start measurement.
⋅⋅⋅
Press the start key of the
connected analytical instrument and then press
START/STOP
of the product main body.
•
The display remains “AUTO” and the Measuring screen is
displayed. Continuous measurement by the product main
body starts.
•
During continuous measurement, the sequence operation
currently being performed is displayed.
•
During continuous measurement, product main body key
operations other than
START/STOP
and stirring speed
adjustment during stirring are ineffective.
Measuring screen
(arm moving)
③
Effective operations during measurement
⋅⋅⋅
The
following operations can be performed during continuous
measurement:
•
When the
or
key is pressed during stirring
operation, the stirring speed can be adjusted.
•
Continuous measurement can be stopped.
>>
④
(3)
Measuring screen
(stirring operating)
④
Measurement end
⋅⋅⋅
Continuous measurement ends in
any of the cases (1) to (3) below and Measurement Cancel
screen is displayed.
(1) When measurement of table No. with end detection pin
inserted is ended
(2) When measurement of the end table No. set at the
product is ended
(3) When
START/STOP
of the product main body is
pressed
•
When continuous measurement ends, the electrode arm
moves to the washing reservoir and after the electrode
washing operation is performed, the electrode arm moves to
the electrode storage beaker and operation ends.
•
The display returns to the Measurement Waiting screen.
“END” is blinking
during end
processing.
Measurement Cancel screen
(3) Use
by
connecting
acidity titrator (TA-70), salt titrator (TS-70), or
potentiometric titrator (TP-70)
When using this product by connecting it to an acidity titrator (TA-70), salt titrator (TS-70), or
potentiometric titrator (TP-70), setup, measurement start/stop, and other operations are performed
based on the product side operations.
(a) Measurement preparations
①
Set the power switch to ON.
⋅⋅⋅⋅⋅⋅
Turn on the power switches in the following order:
ⓐ
Turn on the analytical instruments.
⋅⋅⋅⋅⋅⋅
Set the power switch of the analytical instruments, etc.
used to ON.
ⓑ
Turn on this product.
⋅⋅⋅⋅⋅⋅
Set the power switch on the left-hand side of the product main body
to ON.
Summary of Contents for TTT-710
Page 115: ... 114 ...
Page 117: ... 116 ...