10. SPECIFICATIONS
Power Source
PoE / PoE+ (IEEE802.3af/at) (via RJ-45)
Power Consumption
13W (Use of the PoE)
22W (Use of the PoE+)
Microphone
Electret Condenser Microphone
Amplifier Rated Output
8W (Use of the PoE)
15W (Use of the PoE+)
Sensitivity
121dB (15W, 1m) (500Hz - 2.5kHz, peak level)
109dB (1W, 1m) (500Hz – 2.5kHz, peak level)
110dB (15W, 1m) (100Hz – 10kHz, pink noise)
107dB (8W, 1m) (100Hz – 10kHz, pink noise)
Frequency Response
315 Hz – 12.5kHz
Sampling Frequency
8kHz-48kHz
Audio Codec
G.711u/a, G.722, L16 (8 – 48kHz)
Network Interface
10BASE-T/100BASE-TX, RJ-45
Network Protocol
TCP/IP, UDP, HTTP, RTP, ARP, ICMP, RTSP,
SIP (RFC3261), ONVIF v17.12
Control Input
1channel, no-voltage make contact input, open voltage: 5 V DC,
short-circuit current: 2 mA or less, removable terminal block (5pins)
Control Output
1channel, relay contact output, withstand voltage: 30 V DC,
control current: max.300 mA, removable terminal block (5pins)
USB Interface
USB2.0 Type-A 1port
Indicator
LAN LINK/ACT, (Yellow/Green)
STATUS (Yellow/Green/Blue)
Dust/Water Protection
IP66
Operating Temperature
-20 to +55
℃
(-4
°
F to +131
°
F)
Operating Humidity
90% RH or less (no condensation)
Finish
Horn flare and body: Aluminum, off-white (RAL 9010 equivalent), paint
Rear cover: ABS resin, off-white (RAL 9010 equivalent), paint
Reflector horn: ABS resin, off-white(RAL 9010 equivalent)
Bracket, screws and bolts: Stainless steel
Dimensions
222(W)
×
231(H)
×
296(D) mm
( 8.74“
×
9.09 “
×
11.65 “ )
Weight
1.5kg (3.31 lb)
Option
Speaker mount bracket: SP-131
Pole band: YS-60B
Speaker mount bracket: SP-301
Speaker mount bracket: SP-201
Swivel bracket: YS-151S
11
