1. System Status Indicators
6. External Control Input and Relay Output
By control input, you can play internal audio
source and call to SIP telephone.
By connecting the relay output to a flashlight
etc., you can indicate the status such as
broadcasting.
7. USB Connection Terminal
Connect a USB memory to this terminal for
internal audio play back. (Can be used by future
updates)
The size of USB device must be
58 x 17 x 11 mm (H x W x D) or less.
Indicator Activity
System Status
Blue
P
ow
er
O
N
During startup or
In broadcasting
Green
Waiting
Yellow
Failure or
Initialization in progress
Extinguished
Power OFF
2. Back Cover
Covers the connector panel. Install the cable
after connecting it to the speaker.
3. Cable Gland
Attaches and secures the end of LAN cable or
contact cable.
Recommended cable:
φ
”4.5~6.0”mm
4. Microphone
For picking up ambient sounds or for two-way
talk.
5. LAN Connection Terminal
To connect a LAN cable for PoE power supply.
8. RESET Button
Press this button to restart the speaker.
9. Signal Grand
Connect a ground wire to earth ground.
(58mm)
(1
7m
m
)
(1
1m
m
)
5. INSTALLATION PRECAUTIONS
IMPORTANT
Do not set up above the horizontal direction.
6
IMPORTANT
Attach the safety wire to the unit. If not attached,
the unit could fall off, resulting in personal injury.
