5
· Never charge batteries of the type which are not
rechargeable.
· Do not solder a battery directly.
· Be sure to use the specified type of batteries.
· Note correct polarity (positive and negative
orientation) when connecting a battery to the unit.
· Avoid locations exposed to the direct sunlight,
high temperature and high humidity when storing
batteries.
• (Applicable to RM-200SF, RM-300X, RM-320F, and
rm-210f only)
Have the unit checked periodically by the shop from
where it was purchased. failure to do so may result
in corrosion or damage to the unit or its mounting
bracket that could cause the unit to fall, possibly
causing personal injury.
2. PARTS INCLUDED wITH THE PACkAGE
check to be sure that all the following components are included with the unit.
Accessory
VX-3004f
VX-3008F
VX-3016f
CD (PC setting software)
1
1
1
Removable terminal plug (2 pins)
2
6
4
Removable terminal plug (4 pins)
1
1
1
Removable terminal plug (6 pins)
2
2
2
Removable terminal plug (12 pins)
2
2
4
Removable terminal plug (17 pins)
1
1
2
ferrite cable clamp
2
2
2
3. COMPOSITION OF THE VX-3000 INSTRUCTION MANUAL
The VX-3000 system Instruction manual is divided into 4 parts.
Please read the proper manual for your purpose.
For unit installation
For broadcast management and setup
For broadcasting operation
USER'S MANUAL
(PLEASE READ THIS MANUAL FIRST)
Operating instructions
Setting software instructions
Installation manual
This manual
Separate manual (CD)
Separate manual (CD)
Separate manual (CD)
4. GENERAL DESCRIPTION
The TOA VX-3000 Series broadcast system is designed for both general and emergency purpose broadcasts.
It is comprised of the Voice Evacuation Main Frame, Digital Power Amplifiers, Power Supply unit, Emergency
Power Supply, and a user-specified number of Remote Microphones.
The VX-3000 system allows 3 types of broadcasts to be made: General-purpose broadcast such as general
paging and BGM, Emergency broadcast that the emergency messages are to be broadcast by an automatic
announcement device or remote microphone, All-zone emergency broadcast* that is to be made available even
during system malfunctions or failures.
The dedicated software is used to perform all necessary settings related to the entire system operation and
functions including system configurations, input-to-output signal routing, function assignment to the operation
keys, operation of the control terminals, and selection of the failure detection points.
* Available when an analog link is connected.
