4
USING YOUR JUICER
Please fill out information that follows warranty.
1. Before using, wash all removable parts, see CARE AND CLEANING.
2. Insert the shaft down into the motor base.
3. Place container on base by aligning the arrows on the base and
container; press down (See Figure 2). Turn the container clockwise
until it locks into place (a “clicking” noise will be heard). Line up the •
icon on the base near the cord and the icon on the container. Do
not force the container beyond this point.
4. Place the Adjustable Strainer on the Strainer Base. To do this, line up
the notches in the Adjustable Strainer with the tabs on the strainer
base (See Figure 3). Press down until the Adjustable Strainer snaps
into place.
5. Place the strainer base over the top of the container as shown.
6. Place the small cone over the center of the strainer. Use this cone for
small fruit such as lemons and limes. For larger fruit such as grapefruit
and oranges, place the large cone over the small cone.
7. Unwrap cord and plug unit into 120 V ~ 60 Hz outlet.
8. Push down on the cone assembly with halved fruit to start juicing
action. Do not use excessive force. The juicer will automatically
reverse direction periodically to make juicing easier. To stop, lift the
fruit from the cone assembly.
9. Unplug and carefully remove container by holding the handle and
turn counter-clockwise to release; remove from the base.
10. Remove cone assembly from the container. Use container to serve
juice.
Figure 2
Figure 3
TMR 1108_IB_18-5-05 18/05/2005 18:30 Page 4
