BEFORE USING FOR THE FIRST TIME
1. Remove all packaging materials including those which may be
inside the Toasting Slots or Toasting Lever slot.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not
use abrasive cleaners.
3. Do not put the Toaster, cord or plug in water.
4. Be sure the Crumb Tray is pushed all the way up and latched
into position in the Toaster and the Toasting Lever is in the
UP position.
5. Unwrap power cord from Cord Storage Area on underside of
Toaster and plug into a 120V AC outlet.
6. Turn the Adjustable Browning Control to the lightest setting (see
Page 5 for reference).
7. Lower the Toasting Lever until it locks in place. Operate with-
out bread once or twice to burn off any manufacturing residue.
You may notice a slight amount of smoke; this is normal and
will stop as the heating elements continue to heat.
OPERATING INSTRUCTIONS
TOASTING BREAD
1. Be sure no bread or other objects are inside the Toasting Slot.
Place Toaster on a flat, level, heat resistant surface and plug the
power cord into a 120V AC electrical outlet.
2. Position the Adjustable Browning Control to desired setting. The
first time you toast, it is best to use both Toasting Slots; position
the Adjustable Browning Control to Medium (mid-way between
the lightest and darkest setting); then adjust each subsequent
toasting to your preference.
3 Remove all protective wrappings from food before placing into
the Toasting Slots. Avoid toasting torn bread slices that may get
lodged in Toasting Slot.
4. Insert the bread into the Toasting Slots. Lower the Toasting
Lever until it locks into place. The Centering Guides will auto-
matically center the bread for even toasting. When the bread
is lowered into position, it will automatically begin to toast.
NOTE: Use slot marked when toasting single slice or portion.
Use bread slices that fit freely into Toasting Slots.
6
TMR_T210/T210B_IB_25-7-06 7/25/06 4:25 PM Page 6
