background image

© 1999 Toastmaster, A Middleby Company

NO QUIBBLE LIMITED WARRANTY

TOASTMASTER, HEREINAFTER REFERRED TO AS THE SELLER, WARRANTS

EQUIPMENT  MANUFACTURED BY IT TO BE FREE FROM DEFECTS IN MATERIAL

AND WORKMANSHIP FOR WHICH IT IS RESPONSIBLE. THE SELLER’S OBLIGATION

UNDER THIS WARRANTY SHALL BE LIMITED TO REPLACING OR REPAIRING, AT

SELLER’S OPTION, WITHOUT CHARGE, ANY PART FOUND TO BE DEFECTIVE AND

ANY LABOR AND MATERIAL EXPENSE INCURRED BY SELLER IN REPLACING OR

REPAIRING SUCH PART.  SUCH WARRANTY SHALL BE LIMITED TO THE ORIGINAL

PURCHASER ONLY AND SHALL BE EFFECTIVE FOR A PERIOD OF ONE YEAR

FROM DATE OF ORIGINAL INSTALLATION, OR 18 MONTHS FROM DATE OF

PURCHASE, WHICHEVER IS EARLIER; PROVIDED THAT TERMS OF PAYMENT

HAVE BEEN FULLY MET.

As part of 

Toastmaster’s

 

“no quibble” warranty, 

all 

in-warranty 

Toastmaster

 products that require service,

are to be serviced 

on site

.

The warranty period for Accu-Miser griddles shall be 24 months from the date of installation or 30 months

from the date of purchase, whichever is earlier.

Normal maintenance functions, including lubrication, cleaning, or customer abuse, are not covered by this

“no quibble” warranty.

Seller shall be responsible only for repairs or replacements of defective parts performed by Seller’s authorized

service personnel.  Authorized service agencies are located in principal cities throughout the contiguous

United States, Alaska, and Hawaii.  This warranty is valid in the 50 United States and is void elsewhere

unless the product is purchased through Middleby International with warranty included.

The foregoing warranty is exclusive and in lieu of all other warranties, expressed or implied.  There

are no implied warranties of merchantability or of fitness for a particular purpose.

The foregoing shall be Seller’s sole and exclusive obligation and Buyer’s sole and exclusive remedy for any

action including breach of contract or negligence.  In no event shall Seller be liable for a sum in excess of the

purchase price of the item.  Seller shall not be liable for any prospective or lost profits of Buyer.

i

Toastmaster  •  1400 Toastmaster Drive  •  Elgin, IL 60120  •  USA  •  (847)741-3300  •  FAX (847)741-4406

Middleby Corp 24-Hour Service Hotline 1-800-238-8444

www.middleby.com

is a registered trademark of Toastmaster, A Middleby Company.  All rights reserved.

Summary of Contents for TB208













Reviews: