6
To Assemble (Refer to Figure 3):
1.
Take the Container and place it on the
Base. Line up the Locking Tabs and turn
clockwise until the Container locks into
place.
2.
Lower the Disc Post onto the Center Post
in the Container.
3.
Center the Slicing/Shredding Disc with
desired side facing upward (SLICE or
SHRED) on Disc Post.
4.
Line up the Food Chute/Cover with the
Locking Tabs on the Container, making
sure that the Pin in the Food Chute/Cover
is inserted into the top of the Disc Post.
Turn Food Chute/Cover clockwise until
you hear a click.
To Use:
1.
Fill Food Chute/Cover with food. Position
Food Pusher over food.
2.
Press down lightly but firmly on Food
Pusher while pressing the desired
ON/PULSE Switch function.
3.
After processing food, press Switch to the
OFF position. Allow the Slicing/Shredding
Disc to stop rotating before adding more
food to the Food Chute/Cover.
HOW TO SLICE OR SHRED IN THE CONTAINER
FIGURE 3
