Toastmaster TFP8W, Use And Care Manual

How to Chop Food

1. Attach the 8-Cup Processor Bowl to the

Food Processor Body by placing on Drive
Shaft. Turn 8-Cup Processor Bowl counter-
clockwise until it clicks into place. (See
Picture A on previous page)

2. Carefully place Chopping Blade on Drive

Shaft with the Chopping Blades sliding
down first. (See Picture G)

3.

Food should be cut into 

1/2”

to 1”pieces, before placing in 8-Cup

Food Processor.

4.

Place Lid with Food Chute so each Interlock Mechanism is to the
left of the Tabs. Turn the Lid with Food Chute counter-clockwise
until you hear or feel the latch lock. Do not force the Interlock
Mechanism. (See Pictures C & D)

5.

Plug your 8-Cup Food Processor into a 120 V AC electrical
outlet.

6.

Make sure Shield is down. This will keep food in the Food
Processor Bowl.

7.

Set Speed Control to level 1.

8.

For more power, slowly increase Speed Control from 1 to a
higher number or turn to OFF position and press Pulse Button.
(See Picture F)

9.

After chopping food, move Speed Control Dial to OFF and
unplug unit.

10. Remove the Lid with Food Chute by turning it clockwise.

Carefully remove Chopping Blade from Drive Shaft. Grasp handle
of the 8-Cup Processor Bowl and turn clockwise to remove. 
Clean according to directions under User Maintenance.

Picture C

Picture D

Picture G

Operating Instructions (

Cont.)

4. Place Lid with Food Chute so each Interlock Mechanism is to the

left of the Tabs. Turn the Lid with Food Chute counter-clockwise
until you hear or feel the Latch lock. Do not force the Interlock
Mechanism. (See Pictures C & D)

5. Make sure unit is in the OFF position. Plug

your 8-Cup Food Processor into a 120 V AC
electrical outlet.

6. Set Speed Control to level 1.

NOTE: To process food into 8-Cup Food
Processor make sure that Shield is closed.
To process food using the Food Chute 
make sure the Shield is Open,
(See Picture E) and place a bowl/ container
under the chute to catch processed food.

7. Using constant, even pressure on the

Food Pusher, feed food into the Chute. For
more power, slowly increase Speed Control
from 1 to a higher number or turn to OFF
and press Pulse Button. (See Picture F)

8. After processing food, move speed Control

Dial to OFF and unplug unit.

9. Remove the Lid with Food Chute by turning it clockwise.

Carefully remove Slicing/Shredding disc and Discharge disc.
Grasp handle of the 8-Cup Processor Bowl and turn clockwise to
remove. Clean according to directions under User Maintenance.

Picture E

Picture F