- 6 -
2.3 How to install
Please set a suitable place to install REDON according to the following requirements :
(1) A place where the base is flat.
(if the base is not even condition, it may cause vibrations).
(2) Please place the power cord at a secluded place.
(3) Open the motor cover, insert the support and lock with M12 screw.
Please throw the cable to support as follow pictures.
(4) Assemble the handrail with support. Pull out the main cable from right support
throughout the handrail.
(4) Assemble front handrail including Emergency Key and Touch Heart Rate Sensor.
Pull out cables from left Support throughout the left Handrail.
(5) Assemble console back panel by fixing Console Support to Handrail. Cover and
assemble console front panel.
Cation : Before cover console front panel connect Emergency Key cable and Touch
Heart Rate Sensor cable from handrail to console board
(6) Turn the power On and check treadmill operation