2.
Set-up
Place the product on a level surface at least 2 meters away from any hazard, struc-
ture or obstruction such as fence, garage, house, overhanging branches, laundry
lines or electrical wires. DO NOT place on hard surface such as concrete or asphalt
as a fall onto hard surface can cause serious injury. We recommend that the slide
is erected in a position so that it is not facing directly into the sun so that the users
do not have the sun shining into their eyes.
Clear the play area of all sharp objects such as stones, twigs or any other object
that can cause injury to the players and / or damage to the structure’s construc-
tion.
Unpack the slide structure and unfold fully as shown in (Fig.1).
Unpack the air fan blower from its carton and follow the IMPORTANT assembly and
operating instructions BEFORE attaching to the structures airflow inlet tube as shown
in (Fig.2). The nylon inlet tube is simply attached around the fan’s outlet by tying
the cord tightly behind the tube’s flange.
Set up Air fan blower and secure with the ground pegs as shown in (Fig. 3) ensuring
that the pegs are level with or under the ground to reduce tripping hazards.
The slide must be anchored to the ground using ground pegs at each fixing point
on the structure (Fig 4) to prevent overturning or lifting during use. Ensure that the
pegs are level with or under the ground to reduce tripping hazards.
Connect the air fan blower to a suitable electric earthed socket ONLY as directed
in the operating instructions supplied.
Do not use in wet or windy conditions.
5
