Children should remove shoes and any sharp or pointed objects such as buckles on
belts, eyeglasses, etc as these could cause injury to themselves and / or damage
to the structure.
Plug in the Air fan blower and switch on. The slide should inflate within 90 seconds.
If it is taking longer check that the air inlet tube is not obstructed.
AIR SEEPAGE THROUGH SEAMS OF THE STRUCTURE IS NORMAL, AS SOME AIR NEEDS
TO ESCAPE DUE TO THE DESIGN OF THE PRODUCT.
3.
Usage
Always remove shoes, eyeglasses and sharp objects before using the slide.
Do not allow children to slide head first, wrestle, flip or pile on top of others using
the slide as this may result in serious injury.
Always ensure children keep hands and feet inside the slide during use.
Supervise children to prevent risk of fall. The maximum fall height is 130cm (52ins).
The entire product must be inspected before each use to ensure no damage has
been caused which could cause risk of injury.
The splash pool should be part filled with water then connect the water inlet tube lo-
cated on the outside of the slide structure to a garden hose that has a HOZELOCK c
or similar ‘click-in’ adapter fitted. Adjust the tap to the desired water pressure and
the water will spray onto the slide from the spray outlet situated on the top inside
wall of the structure.
THE AIR FAN BLOWER MUST REMAIN CONNECTED TO THE POWER SUPPLY AND RUN-
NING THROUGHOUT THE PLAYING PERIOD OTHERWISE THE STRUCTURE WILL DEFLATE.
THE FAN IS DESIGNED TO RUN FOR SUSTAINED PERIODS.
4.
Storage
All children must be off the slide and pool section before turning off the fan blower.
6
