ASSEMBLY INSTRUCTIONS
8
3. Insert the extruding pipe.
5. Tighten the extruding head
to the fastening plate.
4. Insert desired disc into the
extruding head.
2. Insert the fastening plate
and and turn clockwise.
6. Tighten the disc nut
clockwise. Attach top cover by
inserting the cover into the holes
on the housing above the mixing
bowl and press down.
1. Place the mixing bowl into the appliance
leaving an inch of space. Insert the mixing
axle into the exposed motor shaft by
pointing to the hexagon hole then push the
mixing bowl fully into the appliance.