OPERATING INSTRUCTIONS
BLENDING:
1. Plug the unit into a wall outlet.
2. Lift up the upper cover and install the blender jar onto
the base of the unit. To install place the jar aligned
with the unlocked and turn to the locked position.
Press the power button to turn the unit on.
3. Fill the jar with ingredients for blending. (it is
suggested to put frozen ingredients or ice on top).
4. Place the lid on the jar with one lip aligned with the
handle of the jar. Note: If the lid is not properly
installed the unit will not operate and will beep when
trying to blend. See image below.
5. To manually blend, press VACUUM, it is suggested to
vacuum for about 45 seconds then press VACUUM
again to stop.
6. Once ingredients are vacuumed, rotate the speed
knob clockwise depending on desired speed.
7. To pulse during blending, turn the knob
counterclockwise and rotate as many times as
desired.
7