30
Tofino Xenon Security Appliance Tofino SA
Release 04 05/2015
2.3
Installing and grounding the device
2.3.1
Installing the device onto the DIN rail
Verify that there is at least 4 in (10 cm) of space above and below the
device.
Verify that there is at least 0.8 in (2 cm) of space on the right and left sides
of the device.
To mount the device onto a horizontally mounted 35 mm DIN rail according
to DIN EN 60715, proceed as follows:
Slide the upper snap-in guide of the device into the DIN rail.
Pull down the locking gate using a screwdriver and press the lower part
of the device against the DIN rail.
Snap in the device by releasing the locking gate.
WARNING
FIRE HAZARD
Install the device in a fire protected enclosure according to EN 60950-1.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
