Tohken THIR-6000 Bluetooth Series, Operation Manual

12

2.3 Setting virtual COM port 

2.3.1. Communication 

settings 

By using profile of Bluetooth (SPP), THIR-6000B can be communicated with the host computer through 

virtual COM port.  Communication settings, like baud rate or frame structure, are not valid for 

THIR-6000B. 

2.3.2. Communication 

protocol 

Communication protocol is not needed to be set.    The host computer has to be equipped the software 

with the following functions. 

•

Receiving data from THIR-6000B 

•

Sending serial command to THIR-6000B 

•

Receiving picture from THIR-6000B 

Please contact our sales department about sample of this software. 

2.4 Confirming transmitting data 

Barcode data read by THIR-6000B is sent to host computer.    It is possible to let users know if the data is 

correctly transmitted to the host by using buzzer, LED indicator and vibration. 

Please see more detail at “7.5. How to confirm data transmitting”. 

2.5 Image preprocessing [Only for DM type] 

For barcodes which has low contrast or bad quality of printing/marking, THIR-6000DM-B has image 

preprocessing functions.    These work well especially for direct parts marking application.     

Please see detailed command list at “7.6 Image preprocessing”. 

For more detail about image processing, please ask our sales department about “Operation manual for image 

preprocessing”.