background image

WARNING 

  TO PREVENT FIRE OR SHOCK HAZARD, DO NOT  

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 

  This equipment should be used with DC12V only.    Do not  

use any other power source. 

 

 

 

INFORMATION 

 

This equipment generates and uses radio frequency energy and if not  

installed and used properly, that is, in strict accordance with the  
manufacturer's instructions, may cause interference to radio and  
television reception. If does so, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following  

measures:  

the receiving antenna ;  
Relocate this equipment with respect to the receiver ;  
Move this equipment away from the receiver ;  
Plug this equipment into a different outlet so that this equipment  
and receiver are on different branch circuits. 

 

If necessary, the user should consult the dealer or an experienced 

radio/television technician for additional suggestions.

 

CONTENTS

1. FEATURES ....................................................................................... 1 

 2. PRECAUTION ................................................................................ 1 

  3. CONTROLS AND ADJUSTMENT ........................................... 3 

 4. CONNECTIONS ............................................................................ 10 

 5. OPERATION ................................................................................... 14 

  6. SUPPLEMENTAL INFORMATION  ........................................ 14 

  7. TROUBLE-SHOOTING GUIDE  .............................................. 16 

 8. SPECIFICATIONS ......................................................................... 17 

 9. CONSTITUTION ........................................................................... 23 

10. HOW TO FIX CAMERA ............................................................... 24 

11. APPEARANCES  .............................................................................. 25 

12. MAINTENANCE ............................................ ................................ 26 

Summary of Contents for CS8320B
















Reviews: